Specification
| Dimensions |
23' x 8' x 8'6" (7.15m x 2.50m x 2.60m) |
| Capacity |
30,000 litres |
| Max Gross Weight |
34,000 kg |
| Tare Weight |
4,280 kg |
Calculation pressure
Test pressure
Working pressure |
4.5 Bar
4.5 Bar
3.0 Bar |
| External Vacuum pressure |
0.40 Bar |
| Design Temperature |
110 ºC |
Vessel Material
|
316 Stainless steel low carbon (1.4401)
Shell: 4,6 mm - Ends: 5,5 mm |
| Frame Material |
Carbon Steel |
| Approvals |
IMO 1, ADR/RID, C.S.C., U.I.C., TIR, UK.DOT |
| Manlid |
1 x 500 mm and 1 x 300 mm |
Safety Relief valves
|
1 x 80 mm flanged; Fort Vale hightflow relief valve and
provison for manometer and rupture disc |
Airline outlet
|
1 ½" ball valve and gauge and 1 ½" BSP capped
outlet (DN 40) |
| Bottom outlet |
80 mm, 30ºfoot valve, 80mm butterfly valve with 3" BSP threaded
connector closed by st. cap and retaining cable (Fort Vale or Perolo) |
| Top discharge |
No provision |
| Steam Heating |
6 runs st.st. (304) channels welded to base of tank; manifold;
inlet/outlet pipes screwed and capped 1" BSP Press test: 4,5
Bar Press Working: 3 Bar |
| Gasket Material |
PTFE |
| Insulation |
25 mm Rockwool and 25 mm Polyurethane |
| Cladding |
Prepaint aluminium in the front and rear ends GRP |
| Thermometer |
yes |
| Walkway |
One walkway on top of the tank and fitted with
protection handrail. |
| Ladder |
Stainless steel on the rearside |
| Top boxes |
2 |
| Compartment |
1 |
| Document Box |
Standard PVC |
| Earthing Point |
1 off stainless steel |
Calibaration
|
2 calibaration plates in top box in cm/litres and
inches/US gallons |
