Specification
| Dimensions |
26' x 8' x 8'6" |
| Capacity |
33,500 - 35,000 litres |
| Max Gross Weight |
34,000 kg |
| Tare Weight |
4,600 - 4,900 kg |
Calculation pressure
Test pressure
Working pressure |
4.0 Bar
4.0 Bar
2.67 Bar |
| External Vacuum pressure |
0.21 Bar |
| Design Temperature |
100 ºC |
| Vessel Material |
316 Stainless steel low carbon
Shell: 5,2 mm - Ends: 5,0 mm |
| Frame Material |
Carbon Steel |
| Approvals |
IMO 4, ADR/RID, C.S.C., TIR |
| Manlid |
1 x 500 mm and 4 x 300 mm |
| Safety Relief valves |
2 x 2½" screwed and flanged; Fort Vale highflow relief
valve with manometer between valve and rupture disc |
| Airline |
1 ½" ball valve and gauge and 1 ½" BSP capped |
| Bottom outlet |
80 mm, 30ºfoot valve, 80mm butterfly valve with 3" BSP threaded
connector closed by st. cap and retaining cable |
| Top discharge |
Provision 1 x 3" flange, 1 x 2" flange |
| Steam Heating |
8 runs st.st. 304 channels welded to base of tank; manifold;
inlet/outlet pipes screwed and capped 1" BSP
Press test: 4,5 Bar Press Working: 3 Bar |
| Gasket Material |
PTFE |
| Insulation |
100 mm Rockwool or 500 mm Polyurethane |
| Cladding |
Prepaint aluminium in the front and rear ends GRP |
| Thermometer |
Yes |
| Walkway |
One or two walkway on top of the tank and fitted with protection
handrail. |
| Ladder |
Steel painted on the rearside |
| Top boxes |
5 |
| Compartment |
1 with 4 baffles |
| Document Box |
Standard weld on the frame |
| Earthing Point |
1 off stainless steel |
