Specification
| Dimensions |
30' x 8' x 8'6" |
| Capacity |
32,000 litres |
| Max Gross Weight |
34,000 kg |
| Tare Weight |
5,710 kg |
Calculation pressure
Test pressure
Working pressure |
6.0 Bar
4.5 Bar
3.0 Bar |
| External Vacuum pressure |
0.40 Bar |
| Design Temperature |
120 ºC |
| Vessel Material |
316 Stainless steel low carbon, <0.03%
Shell: 4,2 mm - Ends: 4,76 mm |
| Frame Material |
Carbon Steel |
| Approvals |
IMO 1, ADR/RID, C.S.C.,TIR, U.I.C., BAM, GGV See, GBVS, GGVE |
| Manlid |
1 x 500 mm, 6 point fixed per compartment |
| Safety Relief valves |
2½" BSP screwed and flanged; provision for the future fitting of
bursting disc |
| Airline |
1 ½" ball valve and gauge and 1 ½" BSP capped outlet per
compartment |
| Bottom outlet |
80 mm, 30ºfoot valve, 80mm butterfly valve with 3" BSP threaded
connector closed by st. cap and retaining cable per compartment |
| Top discharge |
No connections |
| Steam Heating |
5 runs st.st. (314) channels welded to base of tank; manifold;
inlet/outlet pipes screwed and capped 1" BSP
Press test: 6 Bar Press Working: 4 Bar |
| Gasket Material |
PTFE |
| Insulation |
150 mm Rockwool compressed to 100 mm |
| Cladding |
White polyester (GRP) |
| Thermometer |
Yes per compartment |
| Walkway |
One or two longitudinal full length panels 475 mm wide, either side of
manyway areas. Including top longitudinal protection handrails. |
| Ladder |
Painted, 300 mm wide on right hand rearside |
| Top boxes |
3 off to enclose manlid area |
| Compartment |
3 1 compartment 7,500 litres
1 compartment 17,000 litres
1 compartment 7,500 litres |
| Document Box |
Standard fitted at left hand rear |
| Earthing Point |
1 off stainless steel |
