20-FT Up to 27 M³, single compartment
Specification
| Dimensions |
20' x 8' x 6'8" |
| Capacity |
24,000 - 27,000 litres |
| Max Gross Weight |
34,000 kg |
| Tare Weight |
3,900 - 4,350 kg |
Calculation pressure
Test pressure
Working pressure |
6.0 Bar
6.0 Bar
4.0 Bar |
| External Vacuum pressure |
0.40 Bar |
| Design Temperature |
120 ºC |
Vessel Material
|
316 Stainless steel low carbon, <0.03%
Shell: 4,6 mm - Ends: 5,9 mm |
| Frame Material |
Carbon Steel |
| Approvals |
US/UK D.O.T. IMO 1, ADR/RID, C.S.C., TIR, U.I.C., BAM, A.A.R. 600, F.R.A. |
| Manlid |
1 x 500 mm, 8 point fixed |
| Safety Relief valves |
2½" BSP screwed and flanged; provision for the future fitting of
bursting disc |
| Airline outlet |
1 ½" ball valve and gauge and 1 ½" BSP capped |
| Bottom outlet |
80 mm, 30ºfoot valve, 80mm butterfly valve with 3" BSP threaded
connector closed by st. cap and retaining cable |
| Top discharge |
Provision 3" flange |
| Steam Heating |
8 runs st.st. (ASTM A240 316) channels welded to base of tank; manifold;
inlet/outlet pipes screwed and capped ¾" BSP
Press test: 6 Bar Press Working: 4 Bar |
| Gasket Material |
PTFE |
| Insulation |
15 mm Rockwool, 70 mm Polyurethane |
| Cladding |
Shell from 0,8 mm thick natural aluminium (grade 5251)
with lapped sealed joints |
| Thermometer |
yes |
| Walkway |
One or two longitudinal full length panels 475 mm wide, either side of
manyway areas. Including top longitudinal protection handrails. |
| Ladder |
Painted, 300 mm wide on right hand rearside |
| Top boxes |
2 off to enclose manlid area hinged to front end |
| Compartment |
1 |
| Document Box |
Standard fitted at left hand rear |
| Earthing Point |
1 off stainless steel |
|